2 Mag STIRRING HOTPLATE 6 incl. heatMIXcontrol unit

Stirring-heating plate with 6 stirring positions, universally applicable for miscellaneous vessel sizes and shapes, stirring point distance 130mm, suitable for 6 x 1000 l Erlenmeyer flask, incl. control unit heatMIXcontrol.
For mass screenings, incubating or concentrating of probes, evaporating of solvents, simple and easy system integration.
Stirring-heating plate with 6 stirring positions, universally applicable for miscellaneous vessel sizes and shapes, stirring point distance 130 mm, suitable for 6 x 1,000 ml Erlenmeyer flasks, incl. control unit heatMIXcontrol.
Stirring Powerful 6 stirring points, maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept, extremely wide speed range of 100 to 2,000 rpm, 100% synchronized speed, jerk-free stirring even at low speeds, 10-step power settings of the stirrer, high power setting for viscous liquids and reduced power setting for long-term operation without any heating effects caused by the stirrer, clear digital display for settings of stirrer speed, stirrer power and temperature of the integrated heater, SoftStart procedure for reliable catching/centering and safe acceleration of the stirring bar, QuickSet for quick setting of start- and maximum speed.
Heating plate made of resistant aluminium alloy, PTFE-coated for increased chemical resistance and easier cleaning, fast heating-up by powerful integrated electrical heater, homogenous temperature distribution, maximum heating temperature +200 °C, PowerDetect for automatic compensation of physically determined loss in stirring power which can come up to 40% at high temperatures, independent over-temperature protection inside the plate.
Separate control unit heatMIXcontrol for operation of magnetic stirrer and integrated heater, for long-term protection of the electronics against aggressive liquids and gases as well as thermal influences, independent and adjustable over-temperature limiter, stainless steel housing, compact and space-saving, connection for external P100 sensor, RS232 interface.

Stirring points: 6.
Stirring point distance: 130 mm.
Stirring volume/point: 1 – 1,500 ml.
Speed range: 100 – 2,000 rpm.
Stirring power (max.): 40W.
Power setting: 10-step (4 - 40W).
Max. temperature: up to +200 °C.
Material plate: aluminum (PTFE-coated).
Material housing: Stainless-steel.
Material sealing: Silicone.
Measurements (WxDxH): 250 x 430 x 75 mm.
Weight: approx. 15 kg.
Permitted operation conditions: -10 up to +40 °C (at 80% humidity).
Permitted storage conditions: -40 °C up to +70 °C, 10 – 95 %, 500 - 1060 hPa.
Protection category: IP 20.
Electrical data: 230V / 1200W