Rainin LR tips GPS-UNV-A-1000µL-/L-768/8

The Green-Pak and Green-Pak SpaceSaver refill system uses existing reusable racks. The refill packaging is made from PET (#1), the most widely recycled plastic. Because no new rack base is needed, this system saves up to 80% plastic compared to a standard rack. With the SpaceSaver system, 8 or 10 wafers are delivered per sleeve, making refilling fast and hygienic.

The low-retention coating consists of a uniform hydrophobic layer applied to the inner surface of the tip. Because aqueous liquids have a higher contact angle on this surface, adhesion is minimised and liquid ejection is maximised. This is particularly relevant for expensive or scarce samples (proteins, DNA, RNA) and liquids with low surface tension such as detergents or isopropanol.

All Rainin BioClean Ultra pipette tips are manufactured in a Class 100,000 cleanroom with fully automated material handling (zero human contact). Each batch is tested for: human DNA (<0.32 pg), bacterial DNA (<1 pg), RNase (≤10⁻⁹ KU/µL), DNase (≤10⁻⁷ KU/µL), endotoxins (≤0.001 EU/mL), proteins (<2 ng/tip), proteases (≤500 ng/mL), PCR inhibitors (not detected) and ATP (<2×10⁻¹² mg/µL).

LTS vs. universal: what is the difference?
Universal pipettes and tips use a classic conical shaft, compatible with multiple brands including Gilson, Eppendorf, Sartorius. They offer flexibility when tips from multiple manufacturers or multiple pipette brands are used in the lab. The seal relies on friction between the conical tip and the shaft, requiring more force for loading and ejection compared to the LTS system. Rainin universal pipettes deliver the same metrological accuracy as LTS models, but are less ergonomic during intensive prolonged use. Universal tips are not compatible with Rainin LTS pipettes.