Labnet FastPette V2 - Pipet controller

- This revolutionary battery powered pipette controller works with glass and plastic pipettes in the 1 to
   100 ml range.
- The FastPette™ was designed with the user in mind. It has a lightweight handle with smooth
   push-buttons and ergonomically located switches.
- Works with pipettes from 1 ml to 100 ml.
- High aspiration speed.
- 25 ml in 4 seconds.
- Cordless work for up to 8 continuous hours.
- Ergonomically designed.
- The aspiration speed can be set to high or low to adjust for the volume of the pipette and viscosity
   of the liquid.
- The suction can also be adjusted by the amount of pressure applied to the trigger button.
- Dispensing can be carried out by gravity or supported by the pump, which empties the pipette with a
   blow out step.
- The FastPette™ is protected from the entrance of liquids by both a PTFE filter and a safety valve.
- To protect samples from cross contamination, both the filter and pipette holder are easily exchanged
   and autoclaved.
- When fully charged, the FastPette™ can be used continuously for eight hours.
- When the low battery light is lit, the unit should be recharged.
- Should the charge run out while working with the pipette, simply attach the power supply and continue
   to use.
- The battery is protected against over charging by timing and thermal systems.
- The FastPette™ is supplied with the power supply/charger and PTFE filter.