Control seals Close-it standard (95x95mm) or Maxi (150x150mm)
Close-it control seals - Essential accessories for sampling:
After taking samples from sacks or big bags by piercing the packaging material, the punctures have to be sealed again. For this purpose, the strongly adhesive close-it control seals are perfectly suitable. Simultaneously, the seals can be used to mark and label the sampled container or bag. Equally important is the clear labelling and sealing of the taken samples. This is the only way to prove unambiguously that the reference or retained sample is identical to the original sample. Safety labels serve in addition as originality seals and protect the samples from manipulations.
Thus, the diverse Bürkle control-seals and labels ensure a safe sampling procedure from the beginning to the end
close-it control seals (essential for sampling) :
Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and timeproven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner. The label has a sandwich-type structure (aluminium/ paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together. The label is not just used to provide a hermetic seal. It is also used for providing quality control information. close-it can be written on with ball-point pen, pencil or felt-tip marker. The rear of the label is coated with a powerful adhesive. This means that close-it sticks firmly to most commercial containers, even to surfaces coated with fine powder, slightly moist or even frozen surfaces where conventional labels or adhesive tape will not stick.
| UNSPSC code | 55121606 |
|---|---|
| Brand | Burkle |
| eclass | 20350307 |
| Reference | CLOSE-IT-STANDARD |
| Material | paper/aluminium |
No price available or do you need more info for this product? Request your info with the form below.
